How do i install windows in a freedos laptop? - posted in Windows 7: So i have a new laptop, HP that doesnt have widnows installed and has something called freedos. I got the iso and used a.

• How To Install Windows 7 On Dos Laptop Using Usb

Although it’s not such a major problem with computers manufactured in more recent years, if you have a slightly older computer, something it might not be able to do is boot up directly from a USB device. Being able to boot your computer from USB flash drive is an advantage because there are so many tools around that can be used to install or repair Windows such as. Having them on USB is easier and quicker than burning discs every time.Installing Windows by is also popular because it can be a good bit quicker than installing from a CD/DVD drive, even Windows 8 setup files can be downloaded and copied straight onto USB these days. It depends entirely on the computer’s BIOS as to whether USB booting is supported and some manufacturers may have provided a BIOS update to enable it. However, what if you encounter an old computer that doesn’t support booting from USB? Thankfully, all is not lost because there is an excellent little tool called Plop Boot Manager which can do the impossible and allow you to boot the computer from USB even if the BIOS does not support it. Plop can boot different operating systems such as Windows or Linux from hard disk, floppy, CD/DVD or from USB.There are probably 2 main scenarios where you would like to use Plop; firstly to be able to boot a USB device when you already have Windows installed, maybe loading a Live Linux or a rescue/antivirus disc etc.

Another way is when you have no operating system currently loaded and perhaps would like to install one via USB. Here, we’ll show you both ways to install the Plop boot manager, one using the Windows Boot Menu and one from a bootable CD. Adding Plop to the Windows Boot MenuThe easiest way to set up Plop to boot your USB flash drive is by adding it to the Windows boot menu so when you have the option to choose a Windows installation on boot, you will also have an entry to load the Plop Boot Manager and launch a USB boot.This isn’t nearly as complicated as it used to be because to get the entries into the boot menu, you used to have to edit the XP boot.ini or manually use BCDEdit in Vista or 7. These days it’s far easier and only requires the execution of a batch file to get the Plop Boot Manager entry inserted into your windows boot menu.1., then extract it to a folder.2.

Navigate into the plpbt-versionWindows folder. Run the InstallToBootMenu.bat file. If you don’t have full admin rights already in Vista and 7, right click on the bat file and “Run as Administrator”.3. When asked if you want to continue, just press Y and enter. The necessary files will be coped and the boot entry added to the menu.Now when you boot your computer, the Plop Boot Manager entry will be there and you can now select it and boot from a USB flash drive.Even though they have different boot menus, running the batch file will create the correct menu entry for both XP or Vista / 7 depending on which you’re using. For anyone who wants to rename the default “Plop Boot Manager” menu entry, open the InstallToBootMenu.bat, look for “set ENTRYNAME=Plop Boot Manager” and change it to what you want. Removing the entry from the Boot Menu1.

This is quite easy whether you have XP, Vista or 7 and you just need to run the C:plopplpbt4win tool or run plpbt4win from the Windows folder in the Zip you extracted in the previous step 1.2. Type L and press enter. This will give you the current entries of the boot menu, note down the ID number for the Plop Boot Manager entry.Type R ID to match the ID from step 2 which removes the boot menu entry.For example “R 3” will remove the Plop entry from the list above. Installing Plop if You Don’t Have Windows installedIf you want to boot your computer from USB and have no Windows installed, then you’re probably looking to install Windows from a USB flash drive which can be quicker than using an optical drive. Plop Boot Manager does itself also include an ISO image which can be burned to a CD and then USB can be launched from there.1., then extract it to the folder of your choice.2. Navigate to the extracted Plop main folder and find the plpbt.iso file, it’s the disc image file around 550KB if you have show extensions turned off in Explorer.3.

Now all you have to do is and then boot from it. To make a bit more use of the leftover space on the CD, this next solution could be usefulA rescue and repair CD we just can’t stop recommending to people is. This disc has so many useful tools there are very few things it doesn’t do when you need to perform a number of fixes or recovery operations. Another one of its included features is the Plop Boot Manager which can be loaded straight from the main Hiren menu.1.

All you need to do is if you don’t already have it, and then.2. Boot your computer using the CD and you will get to the main Hiren boot menu. Use the arrows keys to go down to the “PLoP Boot Manager” option and press Enter.You will then get the standard Plop boot options and can boot from USB. Using Plop Boot ManagerAfter you have either booted from a CD or used the Windows boot menu and selected “Plop Boot Manager”, a new menu will appear. If you want to boot your computer from USB, make sure the flash drive is inserted and use the arrow keys to highlight the USB option and press enter.If your computer is old enough to not even have a boot from CD-ROM option, a floppy version of Plop can be downloaded from the website and it can be used to boot a CD in a similar way. When we tried tried Plop on a laptop that couldn’t boot from USB, it was able to boot up a Windows 7 or 8 setup from USB and install the operating system with no problems at all. I have tried using Plop Boot manager on CD to run Linux Mint from a usb flash drive as my bios only supports USB-ZIP0, but Plop hangs after it has detected the USB port.

I have tried different ports and settings in the boot manager but the same thing happens every time, resulting in having to press the power button. I have used both the USB universal installer from pendrivelinux.com and also Linuxlive USB creator to make bootable flash drives with the Linux Mint iso. It is getting very frustrating and I would be very grateful if someone knows of a solution.Thanks.

Wow, what a find. Have a HP DV5000 with a knackered optical drive and no bios support for USB. Was almost resigned to buying a spares unit from ebay to transplant the optical drive – until I found this.Followed the instructions, and it works a charm! Now able to boot my USB copy of Windows 7, and as an added bonus also able to boot the long corrupted recovery partition on the D: drive in case of any major malfunctions.Many, many thanks for this – you’ve just breathed new life into an old friend.

How To Install Windows 7 On Dos Laptop Using Usb

This guide is for users that did not have Windows 8.1 coming with their G751 laptops out of the box.If you do have Windows 8.1 already installed on your laptop as soon as you got it out of the box then you can still look at some stuff from utilities you should not install to not have any issues located at the last few steps of this post. One of the most important stuff to do for users that have Windows 8.1 installed is use Asus Backtracker to make a backup of their Windows and recovery partition.(!) Do not try to do a clean install before making a backup on a USB stick. It's never bad to have the OS how Asus intended it to be as a backup.(This message was for users that do have windows on their laptops.) =)-Now back to users that do not have a Windows 8.1 installed on their G751.- First steps of a new user.After getting it out of the box plug the charger in and leave it for 3 hours to charge before powering it up for the first time. ( says to do so in the manual that comes with it so I did as advised.

Now get your Windows 8.1 DVD in the laptop and wait for the press any key message to load or press the ESC button repeatedly until you get the boot options window.Use your up and down arrow keys to choose the UEFI:Matsitabd line and press Enter. (Choosing that will avoid the slower boot issue with the flickering upper left corner line.)Press any key when the message shows up and then just wait for Windows setup to load.(!) If you do not have a Windows 8.1 DVD and just have the serial key you can make a bootable USB by going here:Other useful link:2. Select your Language and Keyboard settings and press Next, accept the license agreement, type in your Windows activation Key.3. Select Install Windows only, then when you get to the partition wizard, delete all the partitions and create a new partition.If you have a SSD in your laptop and want to install Windows on it make the first partition on the SSD and leave the HDD with no partition.You can partition the HDD as you wish after windows installs. From what I understand this way is better so Windows won't create boot files on the HDD partition or something like that.Useful for when you want to partition your HDD:4. After finishing the upper step, wait for windows to get the setup ready and once you pass the Personalise step in Windows Setupand get to the window where you are able to choose Express Settings or Custom, go for custom.5. Disable Windows updates by changing the 'Automatically get and install updates for drivers' or else you might get Windows to install drivers silently and you don't want that as you will install them yourself from ASUS website to get the right ones.6.

After the upper steps you should be done by now with setting up Windows and be on your Desktop. I suggest a Restart now before doing anything else and after the restart go to Control Panel Windows Updates and perform an Updates search.( I tend to go first to Windows Defender and check for updates at it first then go to Windows updates but thatis just a personal preference as I try to make sure I get no failed updates.)7. Install all selected updates from Important and when they have been downloaded and installed press the Restart button that it shows you. After the restart go back and search again making sure you have no more updates at Important. (Do not select the ones from optional as you might get failed ones if you install them all at once and even when not asked, after an update has been done do a Restart it matters a lot.)Now go to the Optional ones and install the one that has around 700mb or the biggest one first it might change as they put newer. Restart and go back and install any updates that are left, if there are like just 2-3 install 1 at a time if you are like me and can't stand to see in update history any failed ones.)If you wanna be safe do a search again to make sure you are not missing any, doing the upper steps should get all updates installed correctly and none failing.8.

Lion king soundtrack download rar. The Lion King - Circle Of Life 04:5111.

Go to Control Panel Programs and Features Turn Windows Features on or off and check the first box that says.NET Framework 3.5 and press OK, then when asked where do you want to get them from,choose Download from Windows Updates.After installing and Restarting, search for windows updates again and install any updates that show up after the installation of.NET Frameworks 3.59. Restart and get ready to install the drivers from ASUS.Download the drivers from the below link and install them in the following order. Chipset is recommended always as the first.Reminder: Please do a restart after each driver has installed especially when it asks you and DO NOT install 2 one after another and then do a restart for both as that can cause issues.ASUS Drivers link for G751 models:.01 - Intel Chipset Drivers. (!) Please check 2nd post for instructions you need just for chipset.02 - Intel Collaborative Processor Performance Control Driver (You will find 02 to 05 in the Others section ).03 - Intel Management Engine Interface.04 - Intel Rapid Storage technology Driver(For intel rapid storage, right cklick on PNPINST64.exe then right click and choose Run as Administrator and reboot when asked.After reboot go back to the same folder and right click on IRSTPatch.exe then choose Run as Administrator and reboot again after. How r u finding it so far? Any issues or advice u might wanna share since im still a few couple of days before i get mine. How's the speakers, headphone jack audio quality, battery, wifi, display and the 2 most important- heat and performance.Thanks!I've had mine for.

Exactly 2 weeks today! I just recently bought a jy version from amazon. Id like to know if they give out codes for the nvidia game bundle akin to purchasing discrete gpu since this laptop has their top of the line mobile gpu aotm. As seen on nvidias site that they are giving away redeemable codes for the witcher 3 etc. For any gpu purchase.Id really like to save a few bucks if someone can point me to the right direction to claim said promo.Thanks!If the laptop box has a sticker of the game, then there should be a card with the downloadable code inside. Unfortunately, Amazon doesn't have any control over such promos so if there's no sticker, then the model you received isn't part of the promo.

Hello,My questions are:Can I use a USB card reader (SD/SDHC/SDXC) and a micro SDXC or Micro SDHC card and backtracker to make a backup ofwindows and recovery partition?Do I need to make two separate backups.one for the windows and one for the recovery?My existing memory cards were formatted on a win xp 32 system. Do I need to reformat memory card using a 64 bitcomputer system in order to make backup drive of win 8.1 & recovery partitions since win 8.1 is 64 bit.and if so.whatsoftware should I use on the G751 to format the memory card?Any help is truly appreciated. I sincerely apologize for being such a noob.